When it comes to your kitchen utilities, one of the most important ones used daily is your sink. Whether you are washing the dishes or cleaning vegetables for meal preparation, you’ll want to have one working at full capacity. Sometimes, however, the worst manifests in the form of a clogged sink.

Hold off on calling the plumber for now; there are some do-it-yourself repairs that you can implement to unclog the sink. Thankfully, some of the ways on how to drain a clogged sink are relatively easy and inexpensive as well. Allow your inner plumber to take hold by using one of these seven solutions:

1. Garbage Disposal

Before you begin checking possible locations for the sink’s clog, it is important to note that the source may be located elsewhere. Check your garbage disposal first; a clogged disposal can halt running water flow indefinitely if not looked after. Also, if the disposal has overheated, flip the switch on the unit underneath the sink to get things back in working order.

2. Vinegar And Baking Soda

Chemistry can be a wonderful thing, especially as it pertains to repairing your home appliances. Mixing vinegar and baking soda together to create a soluble liquid is a popular means used to drain a clogged sink. Start by removing standing water before you add in vinegar, and then pour a cup of baking soda directly into the drain.

Next, make sure you add in an equal amount of white vinegar. The fizzing should cease before you let the solution sit in the drain for about ten to fifteen minutes. After the time has passed, run some hot water. The clog should be gone, effectively placing the sink back to its optimal state.

3. Boiling Water

If budget plays a vital factor in draining your clogged sink, try using boiled water. You will undoubtedly be fascinated by how simple the repair will be. Begin by placing a kettle on the stove to boil. While you wait for the water to heat up, remove as much standing water from the sink as possible.

Once the water has boiled, pour the entire load down the sink. This should effectively remove the clog impeding on water flow. If it doesn’t, you can repeat the fix as many times as you need to until the clog has been moved. Just allow the water some time to cool before repeating!

4. P-Trap Cleaning

Near the curved portion under your sink’s drainpipe is the p-trap. This can be a direct source of clogging if you are trying to locate the origin of the blockage. To begin the draining process, start by loosening the p-trap from the drainpipe.

Clean out anything that may be stuck in order to remove the clog. If necessary, you may replace the p-trap or continue to use the same one if it is in good, working condition. Run some water down the drain and your sink should be back to a normative state.

5. Drain Snake Use

No, this isn’t about plunging a cobra down your sink’s drainpipe to unclog it. A snake, sometimes referred to as an auger, is a tool used to clear blockages that may be located deeper than initially expected. However, in order to properly use it, you’ll have to disassemble both the drainpipe and p-trap to expose the sink’s “stub pipe.”

A “stub pipe” is the pipe that travels behind the cabinet wall. Once this is in clear view, you can insert the snake into the pipe to break up the clog. Continue inserting the snake into the pipe until it is free of obstruction.

6. Coat Hanger

If a snake isn’t readily accessible, you may even be able to use a coat hanger as a makeshift auger. The only limitation here is the coat hanger’s dimensions; it typically won’t have the reach that the snake has. Nonetheless, it is still a viable replacement if your circumstances allow for it.

Fix the coat hanger into a way that allows you to insert it down the sink’s drainpipe or “stub pipe.” Extend it all the way until you can break the clog within the applicable pipe. Just be sure not to scratch your sink with the hanger’s wire!

7. Plunger

Sometimes, the old-fashioned tools do the best job. Make sure the seal around the plunger is tight; the sink has to be filled with enough water to cover the tool’s bell. Place the plunger over the drain and plunge with force several times. Once the suction clears the clog, put the plunger away and flush the drain via warm, running water.

Once your sink is clear of any blockages in the drainpipe, make sure it is kept clean on a daily basis. A simple concoction of vinegar and baking soda should do the trick, saving you time and money. Take care of your appliances, and they’ll last far longer than their manufacturer’s expiration date!

Similar Posts